5V Power Supply


$9.50

Model: PWR5V
Add to Cart:


Many of our serial converters can optionally be supplied with 5VDC in case the serial interface does not provide sufficient power, or simply just to make sure the converter gets sufficient power. Some of our converters require an external power supply.

This power supply converts 110VAC to 5VDC 1000mA which can be used with all of our 5V converters. It has standard US plugs so it can be used within United States, Japan and other countries with US style plugs.

The power output jack (on the 5V) side is a standard 5.5 x 2.1 x 11.5mm jack which will fit all our 5V converters. If the jack is not needed, for example in case you need to connect the adapter to screw terminals, it can be cut off and the wires stripped.


SPECIFICATIONS
Input AC input voltage: 110 -120 VAC
AC input frequency: 47Hz ~ 63Hz
AC input current: 0.3A max.
Max. inrush current: 30A max.
Leakage current: max. 0.75 mA
Efficiency: 70% typical at full load
No load power consumption 0.5w
Output DC output voltage: +5VDC
Load min: 0.0A
Load max: 1.0A
Polarity Center +
Protection Short circuit protection: automatic recovery
Environment Operating temperature: 0 to 40 degrees C
Humidity 20% to 80% RH
Storage temperature: -20 to +70 degrees C
Storage humidity: 10% to 90% RH
Mechanical Standard ABS plastic case
50(L) x 25(W) x 28.5(H)mm
Output Jack: 5.5 x 2.1 x 11.5mm
datasheet View datasheet




Copyright © 2024 Nordfield. Designed by Nordfield.com
Your IP Address is: 52.90.181.205

McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
wabusiness template