This is a convenient dual port USB to serial adapter; it features two high-speed serial RS232 ports which, once the drivers are installed, both will show up in your operating system's Device Manager as a two virtual COM ports each with its own COM port number, which can be used as if they were actual built-in COM ports.
The adapter circuitry is designed with the Prolific PL2303-TA chipset, which is a good allround processor which ensures compatibility with the majority of serial devices and most current operating systems. Once the drivers are installed this adapter works as a Plug'n'Play device, simply connect it to your USB port and its ready to use.
This USB to serial adapter has protection against static electricity for up to 15KV which is sufficient for most general commercial, laboratory and consumer projects; however for industrial projects and very sensitive applications we recommend using an optically isolated USB to serial adapter to protect your devices and data against damage from high-voltage spikes.
Overall features
- Dual port RS232 to USB adapter
- Compatible with all current operating systems
- Plug and Play compatible
- DB9 thumbscrew interface
- Baud rates up to 128000bps
- Port-powered, no power supply needed
SPECIFICATIONS |
Model number |
AY-1060 |
Recommended operating system |
Windows 10 32/64, Windows 8.1 / 8 (32/64-bit), Windows 7 (32/64-bit), Vista (32/64-bit), XP, 2000 |
Baud rate |
75 to 128000bps |
Processor |
Prolific PL2303-TA |
Power |
Port powered from USB port |
RS232 interface |
2 x DB9 male connector with thumb-screws |
USB interface |
Male type A |
Power on pin 9 |
No |
Parity |
None, Odd, Even, Mark, Space |
Data bits |
4, 5, 6, 7, 8 |
Stop Bits |
1, 1.5, 2 |
Flow Control |
None, Xon/Xoff, Hardware |
Indication LEDs |
TX, RX and Power |
Buffer size |
Dual 512-Byte FIFO |
RS232 output power |
~5.5VDC |
Serial signals |
|
TX, RX, RTS, CTS, DTR, DSR, RI and GND |
|
USB signals |
VCC, DATA+, DATA-, GND, FG |
Flow control |
Automatic. No IRQ Conflicts, no IRQs, IO or DMA required |
Cable length |
48 inches (122 cm) |
Current draw
|
Less than100mA |
ESD static protection |
15KV / 600W/ms |
Compliance |
EIA/TIA RS-232C, USB: v1.0, 1.1, 2.0 |
Operating humidity |
5% To 95% - No Condensation |
Operating Temp. |
-20°C to 60°C |
Certifications |
CE, FCC, RoHS |
Warranty |
1-year Limited Warranty |
ECCN |
4A994.a |
Schedule B |
8471.80.1000 |
HTS |
8517.18.0050 |
Useful accessories