RS232 to RS485 / RS422


$25.75

Model: XS203
Add to Cart:


Combination RS232 to RS485 / RS422 converter. With this converter you can convert any RS232 signal to either RS485 or RS422 in both directions (RS485 to RS232 and RS422 to RS232). It is a good and economical standard solution for most applications that can be used in industrial, commercial, laboratory and consumer environments.

The converter automatically senses whether the RS422 or the RS485 is connected to the interface, simply connect the wires and you are ready to go. No jumpers, drivers or other software needed.

This RS232 to RS485 / RS422 converter is powered from the RS232 port so you don't need to apply an external power supply to the converter. In rare cases where the RS232 port doesn’t provide sufficient power to the converter you can easily connect an external 5 to 12VDC power supply to the terminal header on the RS485 / RS422 side of the converter.

The RS232 side of the converter is a DB9 connector and the RS485 / RS422 side is a DB9 male connector with an optional 6-terminal header block for easy connection of single wires.

This converter is non-isolated, it does have protection against static electricity however for industrial use and for sensitive applications we recommend using an isolated converter. In that case please take a look at our optically isolated RS232 to RS485 / RS422 converters.

    Overall Features
  • Port-powered with optional external power connector
  • Plug and play, no drivers required
  • Protection against static electricity
  • Working mode: asynchronous, full-duplex differential
  • 2 year warranty
  • CE, FCC, RoHS, ISO 9001 Certified

SPECIFICATIONS
Model number XS203
Baud rate 300 - 115200bps
Power Port-powered from RS232 (RTS, DTR, TXD).
Optional external power: 5 - 12VDC
RS-232 interface DB9 female connector
RS422 / RS485 interface DB9 male and terminal board
Current consumption less than 10mA
ESD protection 1500W / 600W/ms
Handshake / flow contro Automatic Send Data Control
Working mode 4-wire RS422 asynchronous, full-duplex differential and half-duplex RS485
Standards EIA/TIA RS-232C / RS-422 / RS485
Transmission distance RS232: Typical: 15 FT (5m)
RS422: Typical: 4000 FT (1200m)
Operating humidity 5% To 95% - No Condensation
Operating Temp. -40°F to 180°F (-40°C to 85°C)
Dimensions 2.47" x 1.33" x 0.70" (62.8 mm x 33.8 mm x 17.8 mm)
Warranty 5-year Limited Warranty
ECCN 4A994.a
Schedule B 8471.80.1000
HTS 8517.18.0050
Useful accessories
serial accessories


Copyright © 2024 Nordfield. Designed by Nordfield.com
Your IP Address is: 18.232.125.188

McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
wabusiness template